UDM Systems

Click on more link to get more information.

Advantages

Semiconductor Dicing Lubricants

	UDM L100
	UDM L200
	UDM L300
	UDM L400

Lubricant Dispensing systems

MSDS

	UDM-L300 series
	UDM-Lseries

8311 Brier Creek Parkway Suite 105-159
Raleigh, NC 27617 USA Phone (336)543-8040
www.udmsystems.com

MATERIAL SAFETY DATA SHEET

This MSDS contain the latest information relating to UDM-L Series Lubricant. UDM Systems® recommends that customers and other users of this product

Review this MSDS and ensure you understand and comply with its contents
Inform all employees and other users of the information contained in this MSDS before handling the product

It is your obligation to understand and comply with all the information contained in this MSDS as well as all applicable laws, and regulations relating to your handling, use, storage and processing material.

Product Name: UDM-L Series Coolant/Lubricant Concentrate October 1, 2004

MANUFACTURER / DISTRIBUTOR

UDM Systems® , LLC
8311 Brier Creek Parkway
Suite 105-159
Raleigh, NC 27617 USA

Product Information Phone (336)543-8040

Chemical Product Identification
Proprietary mixture of ethylene oxide, propylene oxide copolymer derivatives, wetting agents and dispersant

Hazardous Components

Product is not considered hazardous according to the criteria of 29 CFR 1910.1200. It does not contain any substance listed in the SARA 313. It is not a DOT hazardous material.
Product does contain ethylene oxide and propylene oxide copolymer derivatives

Health Hazard Data

No significant signs of symptoms indicative or any adverse health hazard are expected to occur as a result of inhalation exposure.
Eye contact may cause moderate irritation including tearing and redness.
No significant signs or symptoms or any health hazards will occur as a result of skin exposure or absorption.
May cause slight stomach distress, nausea or vomiting if a large quantity is ingested

Physical Properties
Appearance Solubility in water Boiling Point pH Specific Gravity Odor	Slightly cloudy white liquid M ixes in water in all proportions > 212 °F 7.5 1.069 No odor

Fire and Explosion Data

Special fire hazards: None
Fire Fighting Methods: Does not support combustion.

Reactivity Data

Stability: Stable under normal conditions of handling
Conditions to Avoid: No special requirements; use standard industry practices.

Emergency and First Aid

Skin contact: In case of contact, immediately flush with copious amounts of water for at 10 - 20 minutes while removing contaminated clothing and shoes.

Contact with Eyes: Assure adequate flushing of eyes by separation of eyelids with fingers.

If swallowed, wash out mouth with water provided person is conscious. Call a physician immediately.

Spill or Leak Procedures

Clean Up: Soak up spill with inert absorbent or sweeping compound for clean up. Liquid is slippery.

Waste Disposal: Disposal procedures must comply with Local, County, State and Federal regulations. Dispose as laundry detergent

Shipping Information

D.O.T. Proper shipping name: not regulated.
Hazardous substance (CERCLA): NO.

D.O.T. hazard classification:

Primary: none
Secondary: none
D.O.T LABELS REQUIRED: None
D.O.T. PLACARDS REQUIRED: None

BILL OF LADING DESCRIPTION: UN/NA CODE:
Synthetic, none hazardous water based lubricant N/A

Product Label

UDM L 001-99 (Quart Sample)
UDM L 001-01(1 Gallon)
UDM L 001-05 (5 Gallon Pail)
UDM L 001-55 (55 Gallon Drum)

The data given within this MSDS applies to the specific material designated herein and does not relate to its use in combination with any other material.

Website Design MASSOFTIND